INSTALLATION:

Connecting the Adapter to Your DSL/CABLE Modem or your existing router:

1. Make sure that your devices are powered off, including the Router, PCs, and broadband modem.

2. Connect the blue Ethernet cable into the port labeled WAN on the back of the telephone adapter. Connect the other end to one of your router's or cable/DSL modem Ethernet ports.

3. Power on the broadband/DSL/Cable modem, wait for 30 seconds.

4. Power your router if you have any. Wait for 30 seconds.

5. Power Adapter in DC 5V port. The white button on the GS should start blinking with red signal. When the signal comes to rest the GS is registered to 1pinless servers and ready for you to call. This whole procedure takes 4 to 5 minutes.

6. Plug a standard telephone into the Router's Phone port.
In this situation when you pick up the handset of the phone the button should turn green to signal you that all is OK.
IMPORTANT: Do not connect the Phone port to a telephone wall jack. Make sure you only connect a telephone or fax machine to the Phone port. Otherwise, the Router or the telephone wiring in your home or office may be damaged.

7. You can connect you computer with LAN port.